Wired

The JTS PM-35USB is a Livestreaming USB Dynamic microphone. Ideal for Podcasting, interviewing or when there is a requirement for a digital recording.

Complete 7 piece drum mic set for close micing a drum kit.

Includes clamps and sturdy carry case.

The CX 500 is a sub minature condenser microphone ideal for stringed instruments. The CX 500 has a 4 pin mini XLR connection which can be connected to an optional JTS wireless belt pack to go wireless. Supplied with the CX -500 is a MA-500 adaptor which converts the 4 pin mini XLR to standard 3 pin XLR mic connection. Requires phantom power.

Our most versatile discrete microphone. This takes our incredible CX-500 capsule and adds a 201 clip. With a 20Hz-20KHz frequency response and a high SPL, this can be used for either lapel, hairline or instrument use. Black

Our most versatile discrete microphone. This takes our incredible CX-500 capsule and adds a 201 clip. With a 20Hz-20KHz frequency response and a high SPL, this can be used for either lapel, hairline or instrument use. This is in the colour beige.

The CX-500DU is a Dual microphone for stringed instuments especially acoustic guitars.The two different microphones, a sub minature condenser microphone AND a contact microphone combine via the bundled in line PS-510M mixer where you can adjust the balance between the two mics. 2 x 4-pole mini XLR (input). to the mixer and 1 x XLR, bal. (output)9Volt battery or Phantom power required. Very high quality sound.

The CX-500F is an omni directional condenser Flute microphone. Supplied with an innovative, glueless fastening system (for flute tube diameter: 18-26 mm). 4 pin mini XLR which connects to optional JTS wireless belt packs to go wireless

The CX-500F is an omni directional condenser Flute microphone. Supplied with an innovative, glueless fastening system (for flute tube diameter: 18-26 mm). 4 pin mini XLR which connects to optional JTS wireless belt packs to go wireless and supplied with a MA 500 adaptor to convert the 4 pin mini XLR to a Standard XLR connection with low cut and pad switches. Phantom power required.

The CX-500FHW is a head worn omni directional gold plated element condenser Flute microphone. The headset can be used on the left or right positionand with the adjustable boom you can ensure the best possible mic position for the musician. 1.4 m cable with fitted 4-pole mini XLR plug for direct connection to an optional wireless pocket transmitter from JTS and supplied with a MA 500 adaptor to convert the 4 pin mini XLR to a Standard XLR connection with low cut and pad switches. Phantom power required.

The CX-505 is a Condenser Instrument microphone. The Miniature profile makes it unobtrusive for the musician. The shock mount featuring a sturdy clamp and spider suspension ensures secure mounting on drum rims, percussion instruments, and cymbal stands in either a horizontal or vertical position without unwanted resonance. Standard XLR connection.Phantom power required. Supplied in a robust transport case

The CX-506 is a Condenser Instrument microphone. The Miniature profile makes it unobtrusive for the musician. The shock mount clip on clamp with spider suspension ensures secure mounting on drum rims, percussion instruments, and cymbal stands in either a horizontal or vertical position without unwanted resonance. Standard XLR connection.Phantom power required. Supplied in a robust transport case

The CX 508 is a Condenser Instrument microphone. Designed specifically for wind instruments. ideal for Saxophones. It has a wide dynamic range and crystal-clear, crisp sound. features an Integrated spring-type clamp to attach to a horn. The robust gooseneck, can be turned by 230°. 3.3 Metre cable with fitted 3-pole XLR for connection to a corresponding microphone input. Phantom power required. Supplied in a robust transport case with windshield

The CX 516 is a Unidirectional Condenser Instrument microphone. Mini gooseneck design. 3.3 metre cable with standard 3-pole XLR. Requires phantom power. Ideal for accoustic string instruments, woodwind and brass instruments and accordions. Built in mounting clip

The CX 516W is a Unidirectional Condenser Instrument microphone designed for wireless. Mini gooseneck design. with 4 pin mini XLR Compatible with JTS wireless Beltpacks to have the option to go wireless.Requires phantom power. Ideal for accoustic string instruments, woodwind and brass instruments and accordions. Built in mounting clip

The CX 520 is a Moving Coil Dynamic Mic with a 1.5 Metre 4 pin mini XLR and is supplied with an MA-500 so it can be used with a standard XLR connector. Compatible with JTS wireless Beltpacks to have the option to go wireless. Die Cast body and Volume control directly at the microphone.Ideal for harmonica players, Flute, percussion and Vocalists who wish to add special effects to their vocals.

The CX 520D is a Moving Coil Dynamic Mic with a 6 metre cable terminated with 6.3 mm jack plug for direct plugging into an amplifier. Die Cast body and Volume control directly at the microphone.Ideal for harmonica players, Flute, percussion and Vocalists who wish to add special effects to their vocals.

The JTS HP-525 Studio Headphones are of a closed-back circum-aural design for studio quality monitoring in high-noise environments, such as DJ/Disco use, as well as general pro and project studio use. 38mm driver. 20Hz - 20kHz frequency range. Gold-plated 3.5mm stereo jack plug and 6.3mm adapter Black.

The HP-535 is a pair of professional studio monitor headphones. Excellent sound quality, 20-20,000 Hz Frequency range. very comfortable to wear. Semi-open system, over-ear. Padded ear cushions and headrest. 2 Metre cable with single-sided cable inlet. Supplied with 3.5 mm plug and with a 6.3 mm adapter.

The HP-565 is a pair of professional studio monitor headphones. Excellent sound quality, 20-20,000 Hz Frequency range. very comfortable to wear. Semi-open system, over-ear. Padded ear cushions and headrest. 3 Metre cable with single-sided cable inlet. Supplied with gold plated 3.5 mm plug and with a gold plated 6.3 mm adapter.

The HPM-12 is the very new member of the JTS headphone family. Designed to work with JTS interpretation systems. The headphone provides defined sound. The gooseneck renders accurate miking position to avoid pop and wind noise. In line Volume Control and Mic ON/OFF switch are provided. The versatile design renders it good for web communication and gaming.

The HPM-535 deploys a pair of 40 mm neodymium speaker and brings studio quality to communication or game applications.. Noise cancelling condenser capsule assures high quality communication.. Lightweight copper-clad aluminum voice coil provides fast response. Durable and flexible headband renders hours of wear without fatigue. 2 Metre straight cable terminated with two 3.5 mm stereo plugs.

The IE-1 High Definition Dynadriver Earphone reproduces natural frequency response right across the range and is supplied with three pairs of different sized silicon sleeves. It is the perfect partner to our SIEM series In Ear Wireless Monitor Systems.

The IE-6 is our top of the line monitoring earphone and uses a Dual Driver and Crossover system to faithfully reproduce audio reproduction. Precision highs, natural mids and full bass ensure a pleasurable listening experience. This is ideal for both JTS and other manufacturers' In Ear Monitor Systems

The JTS JS-1 is a studio microphone designed for use in the most demanding applications. A specially contoured 1” super thin 24K gold plated diaphragm provides superb reproduction of high sound pressure level signals at all frequencies. A switchable 10dB pad is built-in to increase the SPL capabilities. It’s precise resolution and ability to handle high sound-pressure levels makes it an excellent all-purpose microphone. Included with the JS-1 a versatile shock-mount with standard 5/8”-27 threads.

JS-1 Tube + PS-9 is a large diaphragm vacuum tube studio microphone. It offers exctended frequecy response whilst adding warmth and body with the addition of the tube. The PS-9 is an external power supply with 8 switchable pickup patterns. Comes complete with spider shock mount.

The JS-1 USB is a USB version of the JS-1E, a specially contoured 1” super thin 24K gold plated diaphragm provides superb reproduction of high sound pressure level signals at all frequencies which makes it an excellent all-purpose microphone.USB type B connector. DAC 32, 44.1, 48KHz ADC 8, 11.025, 16, 22.05, 32, 44.1, 48KHz.

The JS-1E is an economic version of JS-1, to reduce cost the JS-1E does not have the PAD and LOW CUT function switches and circuitry of the JS-1 and does not include the spider type shock mount that is included with the JS-1. But it has the same excellent mic capsule. Requires 48 V DC

The JS-1T is a multi-pattern studio microphone with three selectable polar patterns: Cardioid, Omnidirectional and Figure-8 providing superb performance for vocals, acoustic Instruments, drum kits, percussion etc. for either Live or Studio Recording. 3pin XLR. Requires 48V DC phantom power.

The MSP-TM929 bundles TM-929 and a high quality mic stand. The JTS TM-929 dynamic vocal microphone offers great performance at an entry level price. Featuring a wide frequency response of 50Hz-15kHZ, it is an ideal choice for the vocalist who has a limited budget, but wishes not to sacrifice good sound quality. The rugged die cast body, internal shock mount and magnetic reed type on/off switch reduce switching pops and clicks supplied in a box with leather pouch and an XLR cable

The NX-2 is a Metallic enamel-painted die cast metal body with hardened, matte-finished steel grille Integral, dynamic, adjustable instrument microphone. Perfect for bass instruments. User-friendly locking mount provides optimal position for pick-up.

The NX-6 is a Metallic enamel-painted die cast metal body with hardened, matte-finished steel grille Integral, dynamic, adjustable instrument microphone. Perfect for drums. User-friendly locking mount provides optimal position for pick-up.

The NX-7 is a Dynamic microphone. The shock mount keeps handling noise to an extremely low level. Flat top grille design. Perfect for vocalists. Supplied in a box with a leather pouch and clip.

The NX-7S is a switch enabled Dynamic microphone. The shock mount keeps handling noise to an extremely low level. Flat top grille design. Perfect for vocalists. Supplied in a box with a leather pouch and clip.

The NX-8 is a Dynamic microphone . The shock mount keeps handling noise to extremely low level. Reinforced cartridge and hardened rounded grille make NX-8 one of the most rugged mics in the professional microphone industry. Supplied in a box with a leather pouch and clip.

The NX-8.8 is created for studio quality sound particulaly vocals. Smooth and tailored frequency response provide vividness, accuracy and warmth. Extemely accurate pick-up pattern provides the best gain-before-feedback. Specially designed filter effectively minimizes breath pop, stand and handling noise. Electret condensor. Requires phantom power 48V DC . Supplied in a box with a leather pouch and clip.

The NX-8S is a switch enabled Dynamic microphone . The shock mount keeps handling noise to extremely low level. Reinforced cartridge and hardened rounded grille make NX-8S one of the most rugged mics in the professional microphone industry. Supplied in a box with a leather pouch and clip.

The NX-9 is an extremely versatile microphone for overheads, hi-hat, acoustic guitar and other instruments. The NX-9 provides extended frequency response and enlarged dynamic range. It delivers smooth and transparent reproduction. Electret Condenser. Requires phantom power 48V DC or you can power this microphone by inserting a AA battery internally. Supplied in a box with a mic clip. Flat top grille design.

IE-1 - Silicon Ear Pad for IE-1 (3 pairs S,M,L

IE-5 - Silicon Ear Pad for IE-1 (3 pairs S,M,L

IE-6 - Silicon Ear Pad for IE-1 (3 pairs S,M,L

The SX-7 is a Cardioid, rotationally symmetrical about microphone axis, uniform with frequency dynamic microphone. Frequency range of 50Hz - 16kHz. This microphone is perfect for high quality vocal reproduction. Supplied in a box with leather pouch and clip. Black flat top grille design.

The SX-7S is a switch enabled Cardioid,rotationally symmetrical about microphone axis, uniform with frequency Dynamic microphone .Frequency range of 50Hz - 16kHz. This microphone is perfect for high quality vocal reproduction. Supplied in a box with leather pouch and clip. Black flat top grille design.

The SX-8 is a Cardioid,rotationally symmetrical about microphone axis, uniform with frequency Dynamic microphone .Frequency range of 50Hz - 16.5kHz. This microphone is perfect for high quality vocal reproduction. Supplied in a box with leather pouch and clip. Black rounded grille design.

The SX-8S is a switch enabled Cardioid, rotationally symmetrical about microphone axis, uniform with frequency Dynamic microphone. Frequency range of 50Hz - 16.5kHz. This microphone is perfect for high quality vocal reproduction. Supplied in a box with leather pouch and clip. Black rounded grille design.

The JTS TM-929 dynamic vocal microphone offers great performance at an entry level price. Featuring a wide frequency response of 50Hz-15kHZ, it is an ideal choice for the vocalist who has a limited budget, but wishes not to sacrifice good sound quality. The rugged die cast body, internal shock mount and magnetic reed type on/off switch reduce switching pops and clicks supplied in a box with leather pouch and an XLR cable.

The JTS TX-2 Dynamic Supercardioid Microphone provides articulated bass response for the micing of Kick Drums and other low frequency instruments such as Bass Guitar Amps. With an internal pneumatic shock mount to drastically reduce unwanted vibrations and noise. Along with the extremely rugged mic body and the built in adjustable locking stand adapter, the TX - 2 offers professional performance at minimal cost.

The JTS TX-6 Dynamic Microphone is specifically designed for close micing of snare drums, tom - toms, percussion instruments, guitar amplifiers, brass and woodwind instruments and various other acoustic instruments in live performance or in recording studio applications. The TX-6’s supercardioid pickup pattern offers superior rejection of undesired sound sources and delivers high gain before feedback.

The TX-7 is a Dynamic Vocal microphone delivers superb performance at a modest cost. Flat top hardened grille design. The tight cardioid pattern provides excellent off-axis rejection minimizing feedback and undesired background stage noise. The TX-8’s internal shock mount greatly reduces handling noise when used in a handheld application. Supplied with XLR cable in blister pack.

The TX-8 is a Dynamic Vocal microphone delivers superb performance at a modest cost. Rounded hardened grille design. The tight cardioid pattern provides excellent off-axis rejection minimizing feedback and undesired background stage noise. The TX-8’s internal shock mount greatly reduces handling noise when used in a handheld application. Supplied with XLR cable in blister pack.

The TX-9 Cardioid Condenser Microphone offers exceptional clarity and warmth for acoustic instruments: guitar, piano, hi-hats, snare drum, overheads, percussion and as well as choirs. Its performance rivals that of condenser microphones at much higher cost. 60Hz - 18kHz requires Phantom power 48V DC.