Login    info@fbtaudio.co.uk  020 3598 5162
  • 020 3598 5162
VERVE 115MA
  
VERVE 115MA
  

    Processed Active Reinforcement Monitor

    400W + 100W RMS – 131dB SPL

  • Overview
  • Features
  • Specifications
  • 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
  • Bi-amplified models with high dynamic Class D amplifiers 400W + 100W RMS to provide a pleasant sound even at loud volume
  • New ultra-light woofers custom made for FBT with a weather resistant coating, extremely reliable and efficient
  • High efficiency switch mode power supply
  • Advanced filter algorithms including dynamic equalization at low frequencies and advanced energy control to allow high SPL while always granting reliable and distortion-free audio reproduction
  • An increase in total SPL thanks to FBT’s new digital limiter algorithms and increased amplifier power output
  • Passive models: soft-trip high-frequency protection circuitry to ensure proper operation even in overdriven conditions and superb quality components, metallic polyester condensers and large diameter coils. All components embedded in special resin to ensure total immunity to vibration
  • Fully rotatable constant directivity horn to adjust HxV angle coverage in the non-coaxial models
  • Ergonomic integrated carrying handles, M10 rigging points, top-hat speaker stand socket and wall bracket mounting hardware
  • 2-way, bass-reflex, bi-amplified.
  • 400W RMS LF, 100W RMS HF, Class D power amplifiers.
  • 380 mm (15”) custom woofer with 64 mm (2.5”) voice coil.
  • 25 mm (1”) B&C compression driver with 44 mm (1.7”) voice coil.
  • Digital Signal Processor with 4 Equalization Presets.
  • 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing.
  • Frequency response from 57Hz to 20 kHz.
  • Control Panel: balanced XLR/Jack input and XLR link out, Volume, EQ Presets, HP Filter, 3.
  • status LED indicators.
  • 90° omnidirectional angle dispersion.
  • Wall bracket mount flange plate, 35 mm (1 3/8”) top-hat speaker stand socket, two integrated handles.
Code: 35972
Configuration: 2 Way
Built-in amplifier LF/HF: 400/100w RMS
Built-in amplifier peak LF/HF: 800/200w
Frequency response: 57Hz - 20kHz
Low Frequency woofer: 15" with 2.5" VC
High Frequency driver: 1"
Maximum SPL cont/peak: 125.5 / 131dB
Dispersion: 90 x 90 (HxV)
Input impedance: 22kohm
Crossover Frequency: 1.5kHz
AC Power requirements: 450VA
Input connector: XLR with link out
Power cord: 5m IEC
Net Dimension (WxHxD): 620 x 360 x 470mm
Net Weight: 19.6kg
Transport Dimension (WxHxD): 717 x 512 x 595mm
Transport Weight: 22.6

 
 
PRODUCT RANGE